Power Utilities/Power Utilities.iso/utility/pro222/telix.mdm

Text File | 1992-12-09 | 71.6 KB | 5,271 lines

***********************************************************************
* This is version 2.20 of Telix.MDM, Modem Definitions dated 12/10/92 *
* for Telix 3.20.  Please do not modify this file -- it is NOT a text *
* file and  the program will  not work  properly if  you try to  make *
* adjustments.  It will  be updated often,  so if you do think that a *
* setting might  be in error, please contact  Exis at 416-289-4641 by *
* voice, 919-481-9399 by modem (HST Dual Standard v.32bis), or by fax *
* at 919-460-4531.       Direct comments to Jeff Woods, Tech Support. *
***********************************************************************
≈Anchor
Anchor 2400i Internal Half-Card
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~
ATE1Q0M1X4V1S7=60S11=60
AT&C1&D2S0=0
AT&W
0

Your Anchor 2400i Internal Half Card is now configured
for best performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

≈AST
AST 2X9600
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT\J0\Q3\V1&C1&D2\N3
AT&W
10
See Ending Comments
Your AST modem is now configured for best performance with
Telix 3.15.  Set ALL dialing directory entries to 19,200
to get the most out of your modem.

Front Switches: 1 2 3 4 5 6 7 8   Rear: 1 2 3 4 5 6 7
                U D D U D U U D         D D D U D U U
AST Premium Exec Fax
9600
"N"
8
1
Off
On
Off
Off
Off
ATDT\J1\N3
ATDT\J0\N1
ATDT
NO DIAL
40
ATZ^M
AT&F
AT&C1&D2\Q3\J0
AT&W
10
See Ending Comments
Your AST modem is now configured for best performance with
Telix 3.15.  Set ALL dialing directory entries to 19,200
to get the most out of your modem.

Front Switches: 1 2 3 4 5 6 7 8   Rear: 1 2 3 4 5 6 7
                U D D U D U U D         D D D U D U U
≈AT&T
AT&T Model 4000
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
30
ATV1E1Q0X2S7=45S0=0^M



0

Your AT&T modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

AT&T CEO 2224
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT&C1&D2\C1\G0\J0\N3\Q3\V1^M~



0

Your AT&T modem is now configured for best performance with
Telix 3.15.  Correction is enabled so set all of your dialing
directory entries to 9600 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
≈ATI
ATI 2400etc without v.42
960
"N"
8
1
Off
On
Off
Off
Off
AT&Q5DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M
AT&F1V1Q0
AT&C1&D2X4S11=60S7=60S9=10S10=18
AT&W
0

Your ATI modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 9600 bps for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for calling non-errorcorrecting systems.
ATI 2400etc with v.42
960
"N"
8
1
Off
On
Off
Off
Off
AT&Q6DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M
AT&F2V1Q0
AT&C1&D2&K3X4S11=60S7=60S9=10S10=18
AT&W
0

Your ATI modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 9600 bps for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for calling non-errorcorrecting systems.
ATI 9600etc/e v.32/v.42
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q6DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M
AT&F2V1Q0
AT&C1&D2X4S11=60S7=60S9=10S10=18
AT&W
0

Your ATI modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for calling non-errorcorrecting systems.
≈Avatech
Avatech 2400E
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2S7=55S11=60S0=0^M



0

Your Avatech modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈BSM
BSM Quick Comm 2400 MNP
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT\Q3\J0\N3%C1&C1&D2S7=55S0=0
AT&W
0

Your BSM modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 9600 bps for best performance.



BSM Quick Comm 2400 non-MNP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATX4V1Q0&C1&D2&T5S7=55S11=55



0

Your BSM modem is now set up for best perfomance with Telix
3.15.




BSM Quick Comm 1200 non-MNP
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATX4V1Q0&C1&D2S7=55S11=55



0

Your BSM modem is now set up for best perfomance with Telix
3.15.




≈Cardinal
Cardinal 2400 MNP-5
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT \Q3\N3\J0\C1S0=0&C1&D2\V1\K3\C1
AT&W
0

Your Cardinal modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 4800 bps for best performance.



Cardinal 2400 non-MNP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATV1Q0&C1&D2S11=60S7=60S0=0^M



0

Your Cardinal modem is now set up for best perfomance with
Telix 3.15.




Cardinal 9600 v.32 internal
1920
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
AT&F^M~~~ATS7=60S11=55&I1^M~



5
X X U X X
Your Cardinal modem is now set up for best performance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Use dialing prefix 1 for MNP/v.32 systems.
Use dialing prefix 2 for non-MNP/v.32 systems.
Cardinal 9600/2400 Faxmodem
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~ATS11=55S7=60&S1&T5&C1^M



0

Your Cardinal modem is now set up for best performance with
Telix 3.15.




Cardinal 9600 v.32/v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q5DT
AT&Q6DT
ATDT
NO DIAL
40
AT&F^M~~~ATS95=2&C1&D2&S1^M~



0

Your Cardinal modem is now set up for best performance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use dialing prefix 1 for MNP/v.32/v.42bis systems.
Use dialing prefix 2 for non-MNP/v.32/v.42bis systems.
≈Cermetek
Cermetek InfoMate 212a
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
30
ATV1E1Q0X2S7=45S0=0^M



8
U D D U U D U D
Your Cermetek modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Cermetek R/2400 SPC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 S7=55 S11=60 S0=0^M



8
U D D U U D U D
Your Cermetek modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Cermetek 1200 SPC
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X2 S7=55 S11=60 S0=0^M



8
U D D U U D U D
Your Cermetek modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Codex
Codex 2264
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2*FL3*XC1*PT0&R0
AT&W
0

Your Codex modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 19200 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Codex 3260
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2*FL3*XC2*RS0*CT0*MD0*MF0L3
ATS7=60S11=60S10=5&W0
0

Your Codex modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
≈CompuCom
CompuCom SpeedModem CSP
1920
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DT
AT\N3%C0DT
AT\N0DT
NO DIAL
40
AT&F2^M~~~AT&C1&D2*H2V1Q0X4^M



0

Your CompuCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.
Use dialing prefix 1 to transfer text files with MNP.
Use dialing prefix 2 to transfer compressed files with MNP.
Use dialing prefix 3 to transfer files without MNP.
CompuCom Storm v.32
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DT
AT\N3%C0DT
AT\N0DT
NO DIAL
40
AT&F2^M~~~AT&C1&D2*H2V1Q0X4^M



0

Your CompuCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.
Use dialing prefix 1 to transfer text files with MNP.
Use dialing prefix 2 to transfer compressed files with MNP.
Use dialing prefix 3 to transfer files without MNP.
CompuCom Star v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DT
AT\N3%C0DT
AT\N0DT
NO DIAL
40
AT&F2^M~~~AT&C1&D2*H2V1Q0X4^M



0

Your CompuCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.
Use dialing prefix 1 to transfer text files with MNP.
Use dialing prefix 2 to transfer compressed files with MNP.
Use dialing prefix 3 to transfer files without MNP.
CompuCom SpeedModem (Europe)
1920
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DP
AT\N3%C0DP
AT\N0DP
NO DIAL
40
AT&F2^M~~~AT&C1&D2*H2V1Q0X4B0B15^M



0

Your CompuCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.
Use dialing prefix 1 to transfer text files with MNP.
Use dialing prefix 2 to transfer compressed files with MNP.
Use dialing prefix 3 to transfer files without MNP.
≈Computer Periph'ls
Computer Periph'l Hook-Up 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT&C1&D2S7=60S11=60^M~



0

Your Computer Peripherals Hook-Up modem is now configured
for best performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Viva 24m
960
"N"
8
1
Off
On
Off
Off
Off
AT\N3\Q3DT
AT\N0\Q0DT
ATDT
NO DIAL
40
ATZ^M
AT&F1
ATS7=55S11=60
AT&W
0

Your Viva modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

Use Dialing Prefix 1 for calling MNP systems.
Use Dialing Prefix 2 for calling non-MNP systems.
Viva 9642e v.32/v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
ATZ^M
AT&F
ATS7=55&C1&D2S11=60%C0
AT&W
0

Your Viva modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for calling non-error-correcting ones.
≈CTS
CTS Companion 212AH
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
Disconnect
40
ATE1Q0V1S7=55S11=60S0=0^M



0

Your CTS modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

CTS Datacomm 2424ADH
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2S0=0S2=255S10=30X4
AT&W
0

Your CTS modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Data Trek
Data Trek 624
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2\N3\Q3\J1S11=55S7=60^M~



0

Your DataTrek modem is now configured for best
performance with Telix 3.15.  British users add
&P1 to the init string for the guard tone.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.
Data Trek 2424
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2\N3\Q3\J1S11=55S7=60^M



0

Your DataTrek MNP modem is now configured for best
performance with Telix 3.15.  Correction is enabled
so set all dialing directory entries to 4800!

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.
Data Trek v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~
AT&F^M
AT\J0\N3\Q3\V1%C2S134=4S7=60S11=55
AT&C1&D2S0=0&W
0

Your DataTrek v.32 modem is now configured for best
performance with Telix 3.15.  Compression is enabled
so set all dialing entries to 19200 for best speed!

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.
≈Delta Gold
Delta Gold DM 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4 S7=55 S11=60 S0=0^M



0

Your Delta modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Digicom
DSI 9624LE (v.32 bis)
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1*F3&R0
AT&W
0

Your DigiCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
DSI 9624PC/PC+ (v.32bis)
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1*F3&R0
AT&W
0

Your DigiCom modem is now configured for best performance
with 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
≈Digitan
High-IQ Fax Modem (2400)
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4S7=55S11=60S0=0&C1&D2^M



0

Your Digitan High-IQ Fax Modem is now configured
for best performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

≈E*Tech Bullet
Bullet 2400 MNP
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2&T5$C1$E2$F4$X1^M



0

Your E*Tech Bullet 2400 MNP modem is now configured
for best performance with Telix 3.15.

Error correction is enabled so set all of your dialing
directory entries to 9600 for best performance.

Bullet v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2&T5$C1$E1$F4$X5$S0^M



0

Your E*Tech Bullet 2400 MNP modem is now configured
for best performance with Telix 3.15.

Correction is enabled so set all of your dialing
directory entries to 9600 for best performance.

≈Everex
Everex 12e External (EV-936)
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your Everex modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Everex 24e External (EV-945)
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your Everex modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Evercom 24+ (MNP)
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~AT S7=55 S11=60^M
AT&F
AT Q0 V1 X4 &C1 &D2 \Q3 \C1 \N3 \J0 \V1
AT&W0
0

Your Everex modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 4800 bps for best performance.



Everex Everfax 24/96
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~AT S7=55 S11=60^M
AT&FV1Q0
ATX4&C1&D2\Q3\C1\N3\J0\V1%C1&T5
AT&W0
0

Your Everex fax/modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



≈FastComm
FastComm FDX 2424 (MNP-5)
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATE1X4S7=60&C1&D2&B1&G0*H1&I1&M6
AT&W
8
All of them OFF
Your FastComm modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



FastComm 2496 Turbo
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
DATA TIME OUT
40
ATZ^M
AT&FV1Q0
ATE1X4S7=60&C1&D2&B1&G0*H1&I1&M6
AT&W
8
All of them OFF
Your FastComm modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



FastComm 9696 (v.32)
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
DATA TIME OUT
40
ATZ^M
AT&FV1Q0
ATE1X4S7=60&C1&D2&B1&G0&H1&I1&M6
AT&W
8
All of them OFF
Your FastComm fax/modem is now set up for best perfomance
with Telix 3.15.

Compression is enabled, so set ALL of your dialing directory
entries to 19200 bps for best performance.

≈Forval
SA or IM 14,400 v.32bis
38400
"N"
8
1
Off
On
Off
Off
Off
AT\N6DT
AT\N0DT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&K3\J0\Q3\N6%C0
AT&W
0

Your Forval modem is now configured for best performance
with Telix 3.15.  Compression is enabled so set all of your
dialing directory entries to 38,400 for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for non error-correcting systems.
≈Generic
1200 bps without switches
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X1S7=55S11=60S0=0^M



0

Your modem is now configured for best performance with Telix.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

1200 bps with switches
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X1S7=55S11=60S0=0^M



8
U U D U D U U D
Your modem is now configured for best performance with Telix.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

2400 bps without switches
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&C1&D2E1Q0V1X4S7=55S11=60S0=0^M



0

Your modem is now configured for best performance with Telix.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

2400 bps with switches
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4S7=55S11=60S0=0^M



8
U U D U D U U D
Your modem is now configured for best performance with Telix.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

v.32/v.32bis (9600/14,400)
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT&C1&D2X4S7=55S11=55
AT&W
0

Your v.32 modem is configured for best performance with
Telix v3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best speed.
This is a generic configuration and you may need to add
additional proprietary settings to the modem init string.
Refer to the modem manual or manufacturer for details.
≈GVC
GVC 9600 v.32/v.42
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT&C1&D2%C1\Q3\J0\N3\V1
AT&W
0

Your GVC modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 19200 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
GVC 9600+ v.32bis/v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT&C1&D2%C1\Q3\J0\N3\V1
AT&W
0

Your GVC modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
GVC 9600 v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F2^M



0

Your GVC modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
GVC 2400 MNP-5
480
"N"
8
1
Off
On
Off
Off
Off
AT%C1DT
AT%C0DT
ATDT
NO DIAL
40
ATZ^M~~~AT&C1&D2%C1\Q3\J0\N3\V1^M
AT&F
AT&C1&D2%C1\Q3\J0\N3\V1
AT&W
0

Your GVC modem is now configured for best performance with
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 4800 bps for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
GVC 2400 non-MNP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~ATS11=55S7=60^M



0

Your GVC modem is now configured for best performance with
Telix version 3.15.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
≈Hayes
ISDN Terminal Interface
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~
AT&F
AT&C1&D2&K3S7=60S11=55%A1=0%A2=2%A0=2
ATW1&W
0

Your Hayes modem is now configured for best performance with
Telix 3.15. Correction is enabled so set all dialing entries
to 38,400 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Smartmodem 1200 External
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 S7=55 S11=60 S0=0^M



10
U U D U D U U D U U
Your Hayes modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Smartmodem 1200B Half Card
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 S7=55 S11=60 S0=0^M



8
X X U U X X X X
Your Hayes modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Smartmodem 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your Hayes modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Hayes Personal Modem 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 &C1 &D2 S0=0^M



0

Your Hayes modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Hayes Personal Modem 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 &C1 &D2 S0=0^M



0

Your Hayes modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Hayes V-Series 2400
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M AT &Q5 S36=3^M
AT&FV1Q0
AT &C1&D2&K3&L0&P0&Q5 S7=55 S11=60
AT&W0
0

Your Hayes modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 4800 bps for best performance.



Hayes V-Series 9600
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2&J0&K3&P0&L0&Q5S7=55S11=60
AT&W
0

Your Hayes modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 19200 bps for best performance.



Hayes V-Series 9600 with v.42
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M AT &Q5 S36=3^M
AT&FV1Q0
AT&C1&D2&L0&P0&Q5&K3S7=55S11=60
AT&W0
0

Your Hayes modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.



Hayes Ultra-Smartmodem (9600/14400)
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M
AT&FV1Q0N1W2
AT&K3&L0&U0&Q5&C1&D2S7=55S11=60
AT&W0
0

Your Hayes modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 38400 bps for best performance.



≈IBM
IBM Model 5841 (1200)
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1S7=55S11=60S0=0^M



0

Your IBM modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

IBM PC 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your IBM modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Image
Twincom 96/42i
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DT
AT\N3%C0DT
AT\N0DT
NO DIAL
40
AT&F^M~AT&C1&D2S36=7\A3S95=160W1^M~
AT&F
AT&C1&W0
AT&Y0
0

Your Image Twincom is now configured for best performance
with Telix 3.15.  Compression is enabled so set all of your
dialing entries to 38,400 for best performance and speed.

Use dialing prefix 1 to call a v.42bis modem, prefix 2 to
call an MNP modem, and prefix 3 to call "generic" modems.
Twincom 144/DF
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N3%C1DT
AT\N3%C0DT
AT\N0DT
NO DIAL
40
AT&F^M~AT&C1&D2S36=7\A3S95=160W1^M~
AT&F
AT&C1&W0
AT&Y0
0

Your Image Twincom is now configured for best performance
with Telix 3.15.  Compression is enabled so set all of your
dialing entries to 38,400 for best performance and speed.

Use dialing prefix 1 to call a v.42bis modem, prefix 2 to
call an MNP modem, and prefix 3 to call "generic" modems.
≈Incomm
Incomm 2400EC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1V1Q0&C1&D2\K3\N3\Q3\H0S11=60S7=55^M



0

Your Incomm modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Incomm Classic 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1V1Q0&C1&D2&T5S11=60S7=55^M



0

Your Incomm modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Incomm 9600 v.32
1920
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT S11=60\Q3\N3\J0
AT&W
0

Your Incomm modem is now set up for best perfomance with
Telix 3.15. Error correction is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Use dialing prefix # 1 to call MNP/v.32 systems.
Use dialing prefix # 2 to call non-MNP/non-v.32 systems.
Incomm 9605 v.32/MNP-5
3840
"N"
8
1
Off
On
Off
Off
Off
AT%C1\N3DT
AT%C0\N3DT
AT%C0\N0DT
NO DIAL
40
ATZ^M
AT&F
AT \Q3\N3\J0S11=60
AT&W
0

Your Incomm modem is now set up for best perfomance with
Telix 3.15. Data compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.
Use dialing prefix # 1 to call MNP-5/v.32 systems.
Use dialing prefix # 2 to call MNP-4/v.32 systems.
Use dialing prefix # 3 to call non-MNP/non-v.32 systems.
≈Intel
Intel 2400B (non-MNP)
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~AT&C1&D2S11=55S7=60V1Q0X4E1^M



0

Your Intel modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Intel 2400B/2400EX (MNP)
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT\Q3\N3\J0\V1\C1 S11=60
AT&W
0

Your Intel modem is now configured for best performance
with Telix 3.15.  Correction is enabled so set all dialing
entries to 4800 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Intel 9600EX (v.32/v.42bis)
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT \Q3\N3\J0\V1\C0S11=60
AT&W
0

Your Intel modem is now set up for best perfomance with
Telix 3.15.

Compression is enabled, so set ALL of your dialing directory
entries to 38400 bps for best performance.

Intel 14.4EX v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT\Q3\N3\J0\V2\C0&C1&D2%E1%C0X4
AT&W
0

Your Intel 14.4EX v.32bis modem is now configured to work best with
Telix 3.15. Compression is enabled, so set all your dialing directory
entries to 38400 bps for best performance.



Intel SatisFAXion
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M
AT&F
AT \C1 S11=60
AT&W0
0

Your Intel modem/fax is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 4800 bps for best performance.



≈LightCom
LightCom 96 v.32
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q5%C1DT
AT&Q9%C0DT
AT&Q0%C0DT
NO DIAL
40
AT&F^M~~AT&C1&D2\A3S11=55^M~



0

Your LightCom 96 v.32 modem is now configured for best
performance with Telix 3.15.

Use dialing prefix 1 to call v.42bis systems.
Use dialing prefix 2 to call MNP systems.
Use dialing prefix 3 to call non-error correcting systems.
≈Maxwell
Maxwell Modem 300/V
30
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 S0=0^M



0

Your Maxwell modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Maxwell Modem 1200VP
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 X4 &C1 &D2 S7=55 S0=0^M



0

Your Maxwell modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Maxwell Modem 2400PC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 S7=30 S0=0^M



0

Your Maxwell modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Megahertz
MHz EasyTalk 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1 Q0 V1 S7=55 S11=60 S0=0^M



0

Your Megahertz modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

MHz EasyTalk 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT E1Q0V1X4&C1&D2S7=55S11=60S0=0^M



0

Your Megahertz modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Microcom
AX1200/AX2400 w/ compression
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2\Q3\N3\J0S7=55S11=55%C1^M



10
See Ending Comments
Your MicroCom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

Rear Switches:  1 2 3 4 5 6 7 8  Front: 1 2 3 4 5 6 7 8 9 10
                D D D U D U D D         U D D D D U U D U U
AX1200/AX2400 w/o compression
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2\Q3\N3\J0S7=55S11=55^M



10
See Ending Comments
Your MicroCom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

Rear Switches:  1 2 3 4 5 6 7 8  Front: 1 2 3 4 5 6 7 8
                D U D U D U D U         U D D U D U U D
Microcom AX9612c/AX9624c
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT\J0\Q3\N3S0=0
AT&W
10
See Ending Comments
Your MicroCom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Rear Switches:  1 2 3 4 5 6 7 8  Front: 1 2 3 4 5 6 7 8
                D U D U D U D U         U D D U D U U D
Microcom 2400t/QX
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT\J0\Q3\N3\V1%C3\C1S7=60S11=55V1Q0
AT&W
10
See Ending Comments
Your MicroCom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Rear Switches:  1 2 3 4 5 6 7 8  Front: 1 2 3 4 5 6 7 8
                D U D U D U D U         U D D U D U U D
Microcom QXv.32c/v.32bis/4232hs
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT\J0\Q3\N3%C3S7=55S0=0
AT&W
10
See Ending Comments
Your MicroCom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Rear Switches:  1 2 3 4 5 6 7 8  Front: 1 2 3 4 5 6 7 8 9 10
                D D D U D U D D         U D D U D U U D   U
≈Miracom
Miracom Keycard 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~ATV1Q0X4&C1&D2S7=60S11=60^M



0

Your Miracom Keycard is now configured for best
performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Miracom Keycard 3000
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~ATV1Q0X4&C1&D2S7=55S11=60S23=1^M



0

Your Miracom Keycard is now configured for best
performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Miracom WS4000/PC 300
30
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~ATV1Q0X1S7=55S11=60S23=1^M



0

Your Miracom Keycard is now configured for best
performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

≈MultiTech
MultiModem 224 PC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your MultiTech modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

MultiModem 224 EC (MNP)
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATQ0&E1&E4&E7&E13&E15
AT$SB9600$BA0$A1$I1$R1&W
0

Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



MultiModem MT224EH5/EH7
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATQ0&E1&E4&E7&E13&E15
AT$SB9600$BA0$A1$I1$R1&W
10
See Ending Comments
Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

4 Switch set : 1 2 3 4   8 Switch Set:  1 2 3 4 5 6 7 8
               D U D D                  U U D U D U U D
MultiModem v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATB0&E1&E4&E7&E13
ATX4$SB19200$BA1$A1S7=55S11=60S0=0&W
10
See Ending Comments
Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

4 Switch set : 1 2 3 4   8 Switch Set:  1 2 3 4 5 6 7 8
               D U D D                  U U D U D U U D
MultiModem 696E
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0&D2$EP1$F1&Q0&E15&E10
AT&B0&E1&E4&E8&E13$MB9600&BS0$D0&C1
ATX4$SB19200$BA1$A1S7=55S11=60S0=0&W0
10
See Ending Comments
Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Set switch 1 on the block of 8 to OPEN.
Set switch 7 on the block of 8 to OPEN.
MultiModem 932EC
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
ATB0&E1&E4&E8&E10&E13&E15
ATX4$SB19200$MB9600$BA1&W
10
See Ending Comments
Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Set switch 1 on the block of 8 to OPEN.
Set switch 7 on the block of 8 to OPEN.
MultiModem 1432EAB
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
ATB0&E1&E4&E8&E10&E13&E15
ATX4$SB38400$MB14400$BA1&W
10
See Ending Comments
Your Multitech modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Set switch 1 on the block of 8 to OPEN.
Set switch 7 on the block of 8 to OPEN.
≈NEC
NEC 2431c
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2&E1S7=55S11=60
AT&W
0

Your NEC 2431c modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



NEC N9631 v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F2V1Q0
AT&T5\Q3\X1\V1*FT1
AT&W
0

Your NEC 9631c modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



≈Novation
Novation Professional 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO TONE
40
ATE1Q0V1X3YC0YF1YT0 S7=45 S0=0^M



0

Your Novation modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Okidata
OkiTel 2400 Plus
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M
AT&FV1Q0
AT &C1&D2 \V1 \N3 \Q3 \J0 \C1
ATS7=55S11=60&W0&Y0
0

Your Okidata modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



OkiTel 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1 S7=55 S11=60 S0=0^M



0

Your Okidata modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

OkiTel 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your Okidata modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

OkiTel 9600
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2
AT&W
10
See ending comments
Your Okidata modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Rear switch 6 should be on, the rest off.

OkiTel CLP 296
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2\V1\Q3\J0\C1S7=66S11=55^M



10
ALL off except # 6
Your Okidata modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



≈Others
Best Data Smart One 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT&C1&D2S7=60S11=60^M~



0

Your Best Data Products Smart One modem is now configured
for best performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Bocamodem 14.4k v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q9DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M~
AT&F
AT&C1&D2S11=60S36=7S46=138
AT&W
0

Your Bocamodem 14,400bps with v.32bis is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 38,400 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Compaq Enhanced v.42bis
1920
"N"
8
1
Off
On
Off
Off
Off
AT&Q5DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M~
AT&F
AT&C1&D2X4W1S7=60S11=60S46=2&K3S36=7
AT&W
0

Your Compaq enhanced Modem with v.42bis is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 19,200 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Dell FaxModem
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~AT&C1&D2&K3\B1\V1S7=60S11=55S59=96^M



0

Your Dell Fax / Modem is now configured for best
performance with Telix 3.15.  Data compression is
enabled so set all dialing entries to 9600 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Gandalf 2400-A
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT&C1&D2S7=60S11=60^M~



0

Your Gandalf Access 2400/24A modem is now configured
for best performance with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Gandalf 2400-EC
960
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
AT&F^M~~~AT\N3\J0\Q3&C1&D2S7=60S11=60^M~



0

Your Gandalf Access 2400/24A modem is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 9600 for best use.

Use dialing prefix 1 to call error correcting systems.
Use dialing prefix 2 to call non error correcting systems.
Gandalf Access v.3242
1920
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
AT&F^M~~~AT&C1&D2&S1&R2\Q3\N3%C1S7=60S11=55^M



0

Your Gandalf Modem with v.32 is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 19,200 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Infomate 212/A PC
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1V1Q0 S7=55 S11=60 S0=0^M



0

Your Infomate modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Infomate 212/X PC
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1 S7=55 S11=60 S0=0^M



0

Your Infomate modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

MICC v.32/v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N9%C1DT
AT\N3%C0DT
AT\N0%C0DT
NO DIAL
40
AT&F^M~~~AT\N9\J0&C1&D2S7=60S11=60%C1^M~



0

Your MICC v.32 or v.32bis modem is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 38400 for best use.
Use dialing prefix 1 to call v.42bis error correcting systems.
Use dialing prefix 2 to call MNP-only error correcting systems.
Use dialing prefix 3 to call non error correcting systems.
Packard Bell PB9600 MNP
1920
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
ATZ^M~
AT&F
ATB0E1V1Q0S7=60S11=55\A3%C1\J0\N3\Q3
AT&Y0&W0
0

Your Packard Bell Modem with MNP is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 19,200 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Packard Bell PB9600 v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT\N6DT
AT\N0DT
ATDT
NO DIAL
40
AT&F2^M~



0

Your Packard Bell Modem with v.42bis is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 38,400 for best use!

Use dialing prefix 1 for error-correcting systems.
Use dialing prefix 2 for non-error correcting systems.
Zeos Notebook
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2X3\Q3\N3\J0\V1%C1S7=60S11=60^M



0

Your Zeos Notebook is now configured for best performance
with Telix 3.15.  Correction is enabled so set all your
dialing directory entries to 9600 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Zoltrix MF-96P FaxModem
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATS11=55S7=60^M



0

Your Zoltrix FaxModem is now configured for best
performance with Telix 3.15.


An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
ZyXEL U-1496
3840
"N"
8
1
Off
On
Off
Off
Off
AT&K4DT
AT&K1DT
AT&K0DT
NO DIAL
40
AT&F^M~~~ATE1X6&B1&H3&K4&C1&D2S7=60S11=55^M



0

Your ZyXEL U-1496 Modem with v.42bis is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing entries to 38,400 for best use!
Use dialing prefix 1 for v.42bis error-correcting systems.
Use dialing prefix 2 for MNP-4 error correcting systems.
Use dialing prefix 3 for non-error correcting systems.
≈Pace
Pace 300 internal
30
"N"
8
1
On
Off
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~



0

Your Pace modem is now configured for best performance
with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Pace 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~



0

Your Pace modem is now configured for best performance
with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Pace Series IV MNP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~



0

Your Pace modem is now configured for best performance
with Telix 3.15.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.

Pace UltraLink/IV Quad
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~AT&A1&E2&I1&K1\C4\N0\P1\Q0S7=60S11=55^M



0

Your Pace modem is now configured for best performance
with Telix 3.15.  Correction is enabled so set all your
dialing entries to 9600 for best performance and speed.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.
Pace UltraLink/IV v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~AT&A1&E2&I1&K1\C4\N0\P1\Q0S7=60S11=55^M



0

Your Pace modem is now configured for best performance
with Telix 3.15.  Correction is enabled so set all your
dialing entries to 19200 for best performance and speed.

Options might be to add M0 in your modem init string
to silence your speaker if you prefer.
≈Penrill Alliance
Penrill Alliance v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2\Q1,1
AT&W
0

Your Penrill modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



Penrill Alliance v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2\Q1,1
AT&W
0

Your Penrill modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.



Penrill Data Link 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1 S7=55 S11=60 S0=0^M



0

Your Penrill modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Penrill Data Link 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1 S7=55 S11=60 S0=0^M



0

Your Penrill modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Practical Periph'l
Practical PM 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1 S7=55 S11=60 S0=0^M



0

Your Practical modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Practical PM 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S11=60 S0=0 S7=55^M



0

Your Practical modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Practical PM2400SA w/MNP
960
"N"
8
1
Off
On
Off
Off
Off
AT\N3DT
AT\N0DT
ATDT
NO DIAL
40
ATZ0^M~~~~ATS7=55 S11=60^M
AT&F
AT&C1&D2V1X4Q0\J0\N3\Q3\V1\C1
AT&W0&Y0
0

Your Practical modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.

Use dialing prefix 1 to call error-correcting systems.
Use dialing prefix 2 to call non-error-correcting systems.
Practical 2400SA w/o MNP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~~ATS7=55 S11=60^M
ATV1Q0E1X4
AT&C1&D2
AT&W
0

Your Practical modem is now set up for best perfomance with
Telix 3.15.




Practical PM 9600 SA v.32
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~~ATS7=55 S11=60^M
AT&FV1Q0
AT&C1&D2
AT&W0&Y0
0

Your Practical modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.



Practical PM 2400 SA v.42bis
960
"N"
8
1
Off
On
Off
Off
Off
AT&Q5DT
AT&Q8DT
AT&Q6DT
NO DIAL
40
AT&F^M~~AT&C1&D2S7=60S11=60^M



0

Your Practical modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.
Use dialing prefix 1 to call v.42 capable systems.
Use dialing prefix 2 to call MNP-only systems.
Use dialing prefix 3 to call non-error correcting systems.
≈Prometheus
Prometheus Pro 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1 S7=55 S11=60 S0=0^M



0

Your Prometheus modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Prometheus MCT-24I Half Card
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



0

Your Prometheus modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Prometheus 9600
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT*F3^M



0

Your Prometheus modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



≈Quicktel
Quicktel v.32/v.42
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT\Q3&C1&D2^M



10
See Ending Comments
Your Quicktel v.32 and v.42bis modem is now configured
for best performance with Telix 3.15.  Compression is
enabled so set all dialing directory entries to 19200.

Make sure that switches 7 and 8 on the outside are OFF
and that the INSIDE switches are OFF OFF OFF ON.
≈Racal Vadic
Racal Milgo RMD 3221
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M ATX9&C1&D2*F2 S7=55 S11=60 S0=0^M



0

Your Racal-Vadic modem is now set up for best perfomance
with Telix 3.15.

Compression is enabled, so set ALL of your dialing directory
entries to 9600 bps for best performance.

Racal Vadic 1200 PA
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~~AT &C1&D2^M



0

Your Racal-Vadic modem is now set up for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic 2400 PS
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~AT S7=55 S11=60^M
AT&FV1Q0
AT*F2&C1&D2*E0
AT&W0
0

Your Racal-Vadic is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic 2400 LC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M~~~AT S7=55 S11=60^M
AT&FV1Q0
AT &C1&D2 *E0*F2*P1S7=55S11=60
AT&W0
0

Your Racal-Vadic is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic LC2400 PC
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55S11=60



0

Your Racal-Vadic is now set up for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic 2400 PA Model 2
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~AT S7=55 S11=60^M
AT&FV1Q0
AT &C1&D2 X4 *E0*L1*Q1*F2*P1
AT&W
0

Your Racal-Vadic is now set up for best performance with
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic 2400 VP
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1*C1&D2*E0*F2Y1S7=55*Q1S11=60
AT&W
0

Your Racal-Vadic modem is now set up for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Racal Vadic 2400VP MNP
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1*C1&D2*E0*F2Y1S7=55*Q1S11=60
AT&W
0

Your Racal-Vadic modem is now set up for best performance
with Telix 3.15. Compression is enabled so set all of your
dialing directory entries to 9600 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Racal Vadic 9600 PA
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55^M
AT&FV1Q0
AT&C1*C1&D2*F2Y1*Q1
AT&W
0

Your Prometheus modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



≈Supra
Supra Modem 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4 &C1&D2 S7=55 S11=60 S0=0^M



0

Your Supra modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Supra Modem 2400 MNP
480
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F2^M~~AT&C1%C0S11=60S7=60^M~



0

Your Supra modem is now configured for best performance
with Telix 3.15.  Correction is enabled so set all your
dialin entires to 4800 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Supra 2400 Plus v.42bis
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F2^M~~AT&C1\V2S11=60S7=60^M~



0

Your Supra modem is now configured for best performance
with Telix 3.15.  Compression is enabled so set all your
dialin entires to 9600 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Supra 9600 v.32
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1\N3V1%C0S7=55S11=55^M~



0

Your Supra modem is now configured for best performance
with Telix 3.15.  Compression is enabled so set all your
dialing entries to 19200 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
Supra 14,400 v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1\N3V1%C0S7=55S11=55^M~



0

Your Supra modem is now configured for best performance
with Telix 3.15.  Compression is enabled so set all your
dialing entries to 19200 for best performance.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
≈Sysdyne
Sysdyne MDM 24H
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2S7=55S11=60S0=0^M



0

Your Sysdyne modem is now configured for best performance
with Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

≈Telebit
Telebit Internal MNP
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~ATS11=60S7=60S51=5S58=2S66=1S95=2^M



0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Note that this assumed you were in Enhanced command mode. If
you were not, please refer to your manual and redo MODEMCFG.
Telebit T1000
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~
AT&F
ATS51=2S0=0S52=2S131=1S54=2S95=2
ATS58=0S66=1S68=0&W
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



Telebit T1500
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATS51=4S0=0S52=1S131=1
ATS58=2S66=1S68=2&W
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



Telebit T1600
19200
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ0^M
AT&F9
AT&R0&S3S51=5S0=0
ATS58=2S68=2S254=0S255=0&W0
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



Telebit T2000
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATS11=55S52=1S53=1S58=2S66=1S68=2
ATS95=2S110=1&W
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Note that this assumed you were in Enhanced command mode. If
you were not, please refer to your manual and redo MODEMCFG.
Telebit T2500
19200
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
AT&C1&D2&G0&J0&K3&L0&P0&Q5
AT&W
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Note that this assumed you were in Conventional command
mode. If not, please refer to your manual and redo MODEMCFG.
Telebit Trailblazer Plus
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATS11=55S52=1S53=1S58=2S66=1S68=2
ATS95=2S110=1&W
0

Your Telebit modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Note that this assumed you were in Enhanced command mode. If
you were not, please refer to your manual and redo MODEMCFG.
≈UDS
UDS Fast Talk 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S0=0^M



0

Your UDS modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

UDS v.3224/v.3225
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
AT&F^M~~AT&C1&D2%B6\N3\C1\J0\Q3%C0\V1^M~



0

Your UDS modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.



UDS Fasttalk v.32/v.42
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT\N3&C1%B9600C\C1\J0&R0&T5\Q3\V1%C1
AT&Y&W
0

Your UDS modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



≈US Robotics
USR 1200 PC Internal
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X1S7=55S11=60S0=0^M



0

Your USR modem is now configured for best performance with
Telix 3.15.  Set the jumpers as:  J1: Up  J2: Up  J3: Down
and J14:  Up      All switches should be off.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
USR Password 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X1S7=55S11=60S0=0^M



0

Your USR modem is now configured for best performance with
Telix 3.15.  Set the jumpers as:  J1: Up  J2: Up  J3: Right
and J5:  Down      All switches should be Up.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.
USR Sportster 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X2 S7=55 S11=60 S0=0^M



10
U U D U D U U D
Your USR modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

USR Sportster 2400 MNP-5
960
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M
AT&F
AT X4 S11=60 S7=60
AT&W
5
U U U U U
Your USR modem is now set up for best perfomance with Telix
3.15.  Compression is enabled, so set ALL of your dialing
directory entries to 9600 bps for best performance.

Use Dialing Prefix 1 for calling error-correcting systems.
Use Dialing Prefix 2 for calling non-errorcorrecting systems.
USR Sportster 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



8
U U D U D U U D
Your USR modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

USR Sportster v.32
3840
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M
AT&F
ATX4&H1&R2&B1
AT S7=55S0=0 &W
8
U U D U D U U D
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR MicroLink 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



10
U U D U D U U D D U
Your USR modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

USR VARmodem 2400
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1Q0V1X4&C1&D2 S7=55 S11=60 S0=0^M



10
U U D U D U U D D U
Your USR modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

USR Courier HST 9600
1920
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&FV1Q0
AT&K0X6&B1&H1&R2S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR Courier HST 14400
1920
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&K0&B1&H1&R2S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 19200 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR Courier HST 14400 v.42
3840
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&B1&H1&R2&M4&A3S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR Courier HST 16800
3840
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&B1&H1&R2&M4&A3S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR Courier HST Dual Standard
3840
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&B1&H1&R2S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
USR Courier HST Dual 16.8k
5760
"N"
8
1
Off
On
Off
Off
Off
AT&M4B1DT
AT&M4B0DT
AT&M0B1DT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&B1&H1&R2S7=55S11=60
AT&W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 57600 bps for best performance.
Use Dialing prefix 1 for calling HST-equipped systems.
Use Dialing prefix 2 for calling v.32-equipped systems.
Use Dialing prefix 3 for calling non-MNP systems.
USR Courier v.32bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT&M4DT
AT&M0DT
ATDT
NO DIAL
40
ATZ^M~~~
AT&F
ATX6&H1&R2&B1
AT S7=55S0=0 &W
10
U U D U D U U D D U
Your USR modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
≈Ventel
Ventel 2400 Internal
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATE1 Q0 V1 X4 S7=30 S0=0^M



0

Your Ventel modem is now configured for best performance
with Telix 3.15.


If there are four switches, see your manual to set the comm
port.   If there are six, set 1 and 5 open, and 2 closed.
Ventel 2400-33
960
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT %A13B1\C1&C1\D3&D2E1F1V1Q0\G0&G0
AT &L0&M0\N3Q0\Q3&R1\T0&T4V1
AT \V1X4\X1Y0&W
10
See Ending Comments
Your Ventel modem is now configured for best performance
with Telix 3.15.  Set all dialing directory entries to 9600
for best performance as compression is enabled.

Switch Block:  1   2   3   4   5   6   7   8   9   10
              OFF OFF OFF OFF OFF OFF ON  ON  ON  OFF
Ventel Pathfinder
1920
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M
AT&FV1Q0
ATS51=5S54=3S58=2S66=1S68=2S92=1
ATS95=2S111=0&W
0

Your Ventel modem is now set up for best performance with
Telix 3.15.  An option might be to add M0 to the modem
initial string to silence your modem if you prefer.

Compression is enabled so set all dialing directory entries
to 19200 for best performance.
≈Zoom
Zoom 2400 w/ optional fax
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55S11=60^M
AT&FV1Q0
ATE1X3S7=55S11=60S0=0&C1&D2
AT&W
0

Your Zoom modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Zoom 1200
120
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~ATV1Q0X1S7=55S11=60S0=0&C1^M



0

Your Zoom modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Zoom MX 2400 (no MNP)
240
"N"
8
1
On
Off
Off
Off
On
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~ATV1Q0X3S7=55S11=60S0=0&C1&D2^M



0

Your Zoom modem is now configured for best performance with
Telix 3.15.

An option might be to add M0 to the modem initial string to
silence your modem if you prefer.

Zoom HC2400R with v.42bis
960
"N"
8
1
Off
On
Off
Off
Off
ATDT
ATDT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55S11=60^M
AT&FV1Q0X3
ATS11=60S0=0&C1&D2S36=7S95=44
AT&W
0

Your Zoom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 9600 bps for best performance.



Zoom v.32 w/ v.42bis
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q5DT
AT&Q0DT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55S11=60^M
AT&FV1Q0X4
ATS11=60S0=0&C1&D2S36=7S95=44
AT&W
0

Your Zoom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling MNP-equipped systems.
Use Dialing prefix 2 for calling non-MNP systems.
Zoom v.32bis VFP Fax
3840
"N"
8
1
Off
On
Off
Off
Off
AT&Q5\N3DT
AT&Q0\N0DT
ATDT
NO DIAL
40
ATZ^M~~~ATS7=55S11=60^M
AT&F
ATS11=60S0=0&C1&D2S95=44
AT&W0
0

Your Zoom modem is now set up for best perfomance with
Telix 3.15.  Compression is enabled, so set ALL of your
dialing directory entries to 38400 bps for best performance.

Use Dialing prefix 1 for calling error correcting systems.
Use Dialing prefix 2 for calling non-EC systems.